Wind Tower Flange Bolting QC Dossier: Required Records & Torque/Tension Steps
Wind Tower Flange Bolting QC Dossiers are among the most strictly audited packages in onshore and offshore wind projects. Because tower flange joints endure 20–25 years of cyclic fatigue loads, any missing traceability or improper Bolt Torque/Tension record can trigger an immediate NCR.
4 Mandatory Record Groups in Every Bolting Dossier
- Material Traceability: EN 10204 3.1 MTCs for HV 10.9 bolts/nuts/washers (EN 14399) and OEM-approved lubricant certificates.
- Tool Calibration: Valid calibration certificates for Hydraulic Torque Wrenches or Bolt Tensioners and pump pressure gauges.
- Pre- & In-Process Sheets: Flange Gap Inspection record (Feeler Gauge) and signed Torque/Tension Record Sheet per bolt number.
- Visual Verification: Photos of Witness Marks (Torque Stripe) and thread protrusion checks.
Multi-Pass Tightening & QC Verification
| Pass | Field Execution | QC Documentation |
|---|---|---|
| Numbering | Number bolts 1 to N clockwise | Flange map & photo |
| Pass 1 (30%–50%) | Cross-pattern (star) tightening to seat flanges evenly | Pump pressure & sign-off |
| Pass 2 (80%–100%) | Sequential tightening per calibrated Pressure-to-Torque chart | Full Torque/Tension Record Sheet |
| 100% Check Pass | Final verification pass + continuous Torque Stripe across flange, washer, nut, and thread | Timestamped inspection photos |
Critical Field Rules
- Never reuse tightened HV 10.9 bolts: Once tensioned to design preload, bolts removed for flange rework must be replaced with new certified sets.
- Touch-up coating: Clean and inspect flange touch-up areas per ISO 8502-3 dust control before installing bolt caps.
